tool magnets General magnetic separation equipment is generally

 drum magnetic separator routine maintenance requirements introduced
General magnetic separation equipment is generally used magnetic source is weak, fast demagnetization ferrite. magnetic holders Ordinary magnetic separator magnetic field is not high enough to suck all the iron ore, building

Mine ran into a magnetic separator, magnetic separator used in ordinary remedies are: To achieve a relatively high magnetic field, the method they use is the multi-layer stack (usually four to five iron

Oxygen), can absorb about 65% of iron, the rest of the magnetic force reach the run away, ferrite drained after about one year about 35%, with the longer magnetic back

The more powerful, further reducing the magnetic force caused a greater waste of resources, run mine problem still has not been effectively resolved. Common separator almost all lines of magnetic force

Four ferrite, magnetic level change, iron ore rollover effect is poor, causing further magnetic surface run mine. Run away not only the mineral resources, it is the investor's investment

The costs increase

The operator should take the tool magnets initiative to do off, to achieve "two ground", "two prospective."

"Two ground" refers to ground inspection, ground contact. To ground inspection pulp color, size, product quality, water pressure and equipment, etc., in order to be able to detect problems. Attendance

Contact is between the upper and lower step to ground contact, in order to grasp the overall situation. "Two quasi" is the accurate judgment, accurate adjustments. In the "two ground" on the basis of accurate judgments ore

Nature and other factors change and seize the main contradiction, accurate adjustment.

Open parking and common troubleshooting methods:

1: Driving and parking

Driving should process, carried out from the back, parking on the contrary;

Should be checked before driving circuit, gear, etc., confirm that the device can only drive normal;

Drove material, the first after the water supply to the pulp.

2: Common Failures and

Slurry tank into an obstacle, the performance of the cylinder will not turn, tank fibrillation, tube skin scratched and so on, should stop removing obstructions;

Magnetic blocks off the magnetic system, the performance of the cylinder break barrel murmur, should stop and check, repair magnetic system;

Gear bolts loose, dislocation, it is timely to tighten, anteroposterior.

Separator routine maintenance:

To maintain a good separator, everyday should note the following:

Maintain good lubrication condition;

Always check the wear on the drum skin layer, loosening and breakage should be treated in the repair, breakage at the tape and apply sanding cylinder surface clean, then

After glued firmly;

Should be promptly removed the pulp of iron, welding head and stuff, so worn leather tube.

Magnetic device structure varied, common classification methods: magnetic field strength, medium type, mineral particles selected mode, the tank body, the magnetic field types. Magnetic magnetic parts trays system

Is the core component separator, the production of the magnetic field, magnetic material determines the key recovery. Magnetic system level design techniques and processing means of the continuous progress, is the embodiment of the magnetic

Sorter equipment and technical level of expression.

Magnetic separator for raw materials, mainly through mixing, rolling, crushing, rolling moisture equilibrium is reached after repeated, matching uniform, low gas content, improve the forming rate and forming

Quality of the material through the machine molding products, with high density, good strength, nonporous proportional weight and other characteristics. Energy efficient, high output, the Kai Machinery Plant

Magnetic separator is mainly used Neodymium Magnet for the material to be broken, and then pulverized collect non-ferrous metal equipment. It is widely used with gold, molybdenum election, cement, silicate products, dilute

Nonferrous metal and glass ceramics and other production industries of all kinds of ores and other grind-able materials can be dry or wet grinding. Everything can choose ore mill, magnetic

Sorting machine can be used. This article gives you about magnetic separator equipment for non-ferrous metal sorting.

tool holders Magnetic wand features

Magnetic wand features are: effective removal of iron poles dense, large contact area, magnetic super. In addition to iron container, can be customized according to user requirements process.
A good magnetic rods should do uniform spatial distribution of magnetic flux lines, the maximum magnetic flux density distribution point as magnetic rods filled the entire root, magnetic holders because the general production is on the move

Commodities transmission lines, magnetic stick surfaces should be smooth resistance, does not contain environmentally harmful substances, to avoid contaminated material and the environment.
Magnetic rods work environment determines that it must have a certain degree of corrosion resistance, high temperature resistance, and some situations require a relatively strong magnetic induction. By using different

The thickness of the magnetic sheets can get different magnetic induction. Select a different magnetic bar magnets can determine the maximum magnetic flux density and temperature resistance, generally succeed in conventional

∮ 25 magnetic rods to achieve more than 10,000 gauss magnetic induction surface models that require high performance NdFeB magnets. High temperature magnetic bar at a temperature of over 150 degrees

Generally choose samarium cobalt magnets. But do not choose large diameter SmCo magnetic bar, after all, the price is very expensive samarium cobalt, a magnetic wand price reaches tens of thousands of yuan,
The surface magnetic rods and can be adsorbed magnetic induction intensity proportional to the size of the smallest particles, but in the batteries, pharmaceutical and other fields of small iron impurities can also cause a great impact, the

To be used more than 12,000 gauss magnetic roller (∮ 110 - ∮ 220). Other fields can choose low point.
Magnetic rods in contact with the fluid used in the process will be part of the internal magnetic energy irreversible loss, loss of more than 30% of the initial strength of the metal or coated, stainless steel

Pipe rupture when worn, then need to replace the magnetic rods, and not allow leakage magnet magnetic wand to continue working, magnets are generally more brittle, the surface is also coated with some oil

Material, the environmental pollution is relatively large. Magnetic rods domestic producers generally magnetic rods can work under heavy 1-2 years, 7-8 years working under light load. Mainly used in plastic

, Food, environmental protection,  tool holders,  filtration, chemical, electric power, building materials, pottery, medicine, powder, mining, coal and other industries.
Magnetic rods - danger
November 2005, 20-month-old American boy Kenny, at home, playing a product called "MagnetiX" magnetic wand toys made in China, and accidentally swallow from shedding two

Grain beads. Beads though small was able to produce powerful suction, resulting in severe contraction and Kenny twisted bowel, which in turn hinder the blood supply to the hospital five minutes after the declaration of death

Die. Another four children who were wearing beads and clogged lungs and intestinal surgery.
Magnetic rods - Benefits
Children's toys is the use of a plurality of magnetic rods 2 to 3 cm long magnetic beads stick to each other and the corresponding adsorption principle, and thus spell out a variety of rich three-dimensional modeling.
These magnetic bar toys according to specifications size, is mounted in sizes ranging from exquisite box. They are some whole magnetic rods, some in plastic tube inside inlaid with fine

Small stripe, while in the box comes with a lot of the ball for the assembly. According to sales personnel, as magnetic and strong, so the whole magnetic bar is more expensive, the most expensive sold for a few

Hundred dollars. This toy play is simple, shape changing, for improving child mental helpful.

magnetic tool holder permanent lifting applications require attention

permanent lifting applications require attention of the local
Permanent lifting in applications, magnetic tools there are many caveats, the slightest mistake will have a serious error:
1, the permanent lifting of the structure there is a fall protection measures, high operating signal transduction clear.
2, wind cable Shengan whole coefficient of not less than 3.5 times.
3, each hanging by the test pilot before the job is not lifting crane weight of the object is unknown.
4, permanent lifting the approved design calculations.
5, the operating personnel and the seat belt seatbelt securely suspension points, a dedicated staff up and down magnetic tool holder ladders, ramps, lifting operations personnel have a reliable footing; without overloading for

Industry conditions.
6, the operating platform planks covered; object stack does not exceed the specified height.
7, the magnetic lifter lifting operations by the higher authorities.